Quote:
Originally Posted by thingstodo
No need for a code change. 36V is what I had handy, but I can install more.
I can patch in the smaller 48V pack quite easily. 20A is already quite low compared to the 300A scale on the LEM.
|
Voltage - 84V, 40.1V from 3 x 12V lead, 44V from 4 x 12V gel cells
Kp-id 2000
Ki-id 0
run-pi-test
file 40
Kp-id 2000
Ki-id 2
run-pi-test
file 41
It seems to me like:
- my little 48V gel cell pack can't supply enough current
- the test goes OK for a short time and then it can't sustain the current
- the PWM algorithmn gives up