Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

MPaulHolmes · 09-19-2015, 08:22 AM

I had messed up on the output for that first hex file. It wasn't just putting out Va and Ia, but also several other variables all overwriting each other I think. It's interesting about the RPM. I think once and for all that we need to confirm the number of pole pairs. I think next you should do that '2'<enter> thing again a few times (with the newest hex file loaded) and then hit 'a' just to see the RPM. Maybe so it's going close to 60RPM (according to the display). Try
num-pole-pairs 4

before running the test. If the real rpm was half of what was displayed, maybe we have the wrong number of pole pairs programmed in?

09-19-2015, 08:22 AM	#2055 (permalink)
MPaulHolmes PaulH Join Date: Feb 2008 Location: Maricopa, AZ (sort of. Actually outside of town) Posts: 3,832 Michael's Electric Beetle - '71 Volkswagen Superbeetle 500000 Thanks: 1,362 Thanked 1,202 Times in 765 Posts	I had messed up on the output for that first hex file. It wasn't just putting out Va and Ia, but also several other variables all overwriting each other I think. It's interesting about the RPM. I think once and for all that we need to confirm the number of pole pairs. I think next you should do that '2'<enter> thing again a few times (with the newest hex file loaded) and then hit 'a' just to see the RPM. Maybe so it's going close to 60RPM (according to the display). Try num-pole-pairs 4 before running the test. If the real rpm was half of what was displayed, maybe we have the wrong number of pole pairs programmed in? __________________ kits and boards