Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

Piotrsko · 10-17-2015, 12:30 PM

big pieces of copper require large quantities of watts which is only restriction. I have a Dillon oxy acet torch that will dial down to a 1/64 x 1/4 flame tip at 6500 degrees for making jewelry. a resolder oven should work with 60/40 leaded solder and a good paint on flux paste and pre tinned everything. heck a harbor freight hot air gun should work with through holes. EASY PEASY.

trying now to convince chief finance officer that I REALLY need one of these. hurry up

10-17-2015, 12:30 PM	#2201 (permalink)
Piotrsko Somewhat crazed Join Date: Sep 2013 Location: 1826 miles WSW of Normal Posts: 4,061 Thanks: 467 Thanked 1,112 Times in 981 Posts	big pieces of copper require large quantities of watts which is only restriction. I have a Dillon oxy acet torch that will dial down to a 1/64 x 1/4 flame tip at 6500 degrees for making jewelry. a resolder oven should work with 60/40 leaded solder and a good paint on flux paste and pre tinned everything. heck a harbor freight hot air gun should work with through holes. EASY PEASY. trying now to convince chief finance officer that I REALLY need one of these. hurry up __________________ casual notes from the underground:There are some "experts" out there that in reality don't have a clue as to what they are doing.