[thingstodo]

Originally Posted by e*clipse

They have a board to case measurement of 15mm. If the LEM current sensor is replaced with the Tamura version, it will fit. The Tamura sensor is only 11mm thick.
http://www.tamuracorp.com/clientuplo...L08PXXXD15.pdf

The only issue I see is the temperature specs. -10F for operation and -20F for storage. I regularly see -20F (30+ days per winter) in the mornings, with bad days at -30F (maybe 4 or 5 days per winter) and worse days at -40F(1 or 2 days per winter)

Specs for temperature in vehicles, I'm told - I'm not a mechanical guy - run -40F to -45F operating with storage to -50F or -60F

Below -30F a lot of LCD displays update so slowly they are not usable. But they still work after things warm up.