Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

Piotrsko · 11-15-2015, 03:37 PM

Your warp sounds exactly like the KOSTOV except for size and operating volts.

The 335@72v is peak power advertising. Motor will do that but for only about 4 -6 minutes. No contradiction there. Misleading? Perhaps.

Kevlar banding wont take much above 250c because the bonding agent melts which would immediately thrash motor. I haven't heard of that ERGO: comm stays below 250c.

Batteries should* do what you want unless they are 3+ years old.

Have fun. I think you want to do this in 12v increments. Runaway dc motors are not exciting for long.

11-15-2015, 03:37 PM	#2331 (permalink)
Piotrsko Somewhat crazed Join Date: Sep 2013 Location: 1826 miles WSW of Normal Posts: 4,436 Thanks: 542 Thanked 1,208 Times in 1,065 Posts	Your warp sounds exactly like the KOSTOV except for size and operating volts. The 335@72v is peak power advertising. Motor will do that but for only about 4 -6 minutes. No contradiction there. Misleading? Perhaps. Kevlar banding wont take much above 250c because the bonding agent melts which would immediately thrash motor. I haven't heard of that ERGO: comm stays below 250c. Batteries should* do what you want unless they are 3+ years old. Have fun. I think you want to do this in 12v increments. Runaway dc motors are not exciting for long. __________________ casual notes from the underground:There are some "experts" out there that in reality don't have a clue as to what they are doing. Last edited by Piotrsko; 11-15-2015 at 03:47 PM..