|
The master plan is to install a 2000w samlex pure sine and 1000w Xantrex pure sine inverter into my suburban for remote build projects. This 2000w continuous, 4000watt surge inverter should be able power my mig welder, skill saw, pretty much everything but my plasma cutter and largest air compressors.
Finally got the deal I wanted on that samlex pure sine inverter.
Main problem was the 1000w would not power a skill saw well and had no where near the power to run the welder or 7 inch grinder.
__________________
1984 chevy suburban, custom made 6.5L diesel turbocharged with a Garrett T76 and Holset HE351VE, 22:1 compression 13psi of intercooled boost.
1989 firebird mostly stock. Aside from the 6-speed manual trans, corvette gen 5 front brakes, 1LE drive shaft, 4th Gen disc brake fbody rear end.
2011 leaf SL, white, portable 240v CHAdeMO, trailer hitch, new batt as of 2014.
Last edited by oil pan 4; 10-30-2020 at 09:58 AM..
|