Apparently someone succeeded where I failed in converting the Insight to gas only and silencing the IMA light. I sent him a couple messages.
Quote:
Originally Posted by mudder
Howdy gang,
Dead IMA owners might like the following Youtube link  :
Arduino code and schematic downloadable here:
https://mega.nz/#!RR5inYRD!NUR02LoFj...X-S3Kc8db6BJ-k
US EPA Legal disclosure:
FOR OFF ROAD USE ONLY. It is illegal to operate your vehicle on any federally funded road in the United States with this modification present. Information wants to be free!
Note, a user pointed out a minor error on my wire position on the connector. The wire colors are all correct, but the BLU/WHT wire on the lower seat connector is shown in position 3, when it should be position 4. I'm on the road and can't update the schematic right now, but just remember, the wire colors in the schematic are all correct. |
__________________
I try to be helpful. I'm not an expert.
Last edited by sheepdog 44; 04-30-2016 at 04:01 PM..
|