Quote:
Originally Posted by cowmeat
Check out the lower grill blocks I put on my Insights - pretty sure I did a DIY on it somewhere on here. Over a year and they're still going strong, and without tearing up the bumper
|
IIRC yours make use of the black plastic louver looking trim thing that is attached down there. My car didn't have that piece when I bought it.
But that's okay because I made another underbody aero panel today!
Front is on the left. This pic was taken before putting some thin aluminum sheet metal (that's being generous, the stuff is glorified aluminum foil it's so junky) to protect it from the exhaust pipe. The tab thing on the front goes on top of a thin metal bracket up front, just slides on top, and 4 small screws in the back go into the stock midbody aero panels. Don't hit the orange IMA wires.