Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

The donkey CRX · 06-26-2016, 04:21 PM

You are welcome! Actually I was able to bend the aluminum by putting it in a bench vise and using every pound of my considerable bulk to persuade them to the correct angle.

The holes were drilled with a 1/2" hand drill.

Good luck with your project.

06-26-2016, 04:21 PM	#118 (permalink)
The donkey CRX Master EcoModder Join Date: Feb 2013 Location: TN Posts: 300 MULE VX - '92 Honda civic VX Team Honda 90 day: 92.6 mpg (US) White 94 VX "Show Car" - '94 Honda Civic VX VX 90 day: 79.92 mpg (US) The Walrus - '02 Honda Insight base Gen-1 Insights 90 day: 100.88 mpg (US) Thanks: 399 Thanked 564 Times in 189 Posts	You are welcome! Actually I was able to bend the aluminum by putting it in a bench vise and using every pound of my considerable bulk to persuade them to the correct angle. The holes were drilled with a 1/2" hand drill. Good luck with your project. __________________ http://ecomodder.com/forum/showthrea...avy-28815.html http://ecomodder.com/forum/showthrea...tml#post487289 http://ecomodder.com/forum/showthrea...ile-32769.html