Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

NoD~ · 07-12-2016, 06:36 PM

I've been waiting for these headlights to go on sale before I dropped the cash on them...

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

And today, cooincidentily on "Prime Day", they dropped $20! So I grabbed them, plus all new lights for the headlights assemblies (so turns and all the marker lights... I replaced the marker lights with cheap LEDs originally, but was wanting to replace them soon anyways.) I also got the resistors to change out the relay bar so no hyper blink. Hopefully that works.

The rest wasn't on sale, but if I'm going to drop the bumper to get to the headlights and turns, I might as well get it all done in one shot!

Otherwise, waiting on a hookup for a 5' x 1' sheet of aluminum to complete the exhaust cover. I need to get a 3' x 3' piece of chloroplast to get the rear buttoned up, then the belly will be as aerodynamic as I can get it!

Oh, one last bit of good news is that Darkfish (on IC.net) seems to be making the plug-and-play FAS module again, so hopefully that will be in my short-term future.

07-12-2016, 06:36 PM	#151 (permalink)
NoD~ Master EcoModder Join Date: Sep 2011 Location: USA Posts: 469 Frogger - '00 Honda Insight Gas Only (unHybrid) 90 day: 68.51 mpg (US) Thanks: 13 Thanked 247 Times in 133 Posts	I've been waiting for these headlights to go on sale before I dropped the cash on them... https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 And today, cooincidentily on "Prime Day", they dropped $20! So I grabbed them, plus all new lights for the headlights assemblies (so turns and all the marker lights... I replaced the marker lights with cheap LEDs originally, but was wanting to replace them soon anyways.) I also got the resistors to change out the relay bar so no hyper blink. Hopefully that works. The rest wasn't on sale, but if I'm going to drop the bumper to get to the headlights and turns, I might as well get it all done in one shot! Otherwise, waiting on a hookup for a 5' x 1' sheet of aluminum to complete the exhaust cover. I need to get a 3' x 3' piece of chloroplast to get the rear buttoned up, then the belly will be as aerodynamic as I can get it! Oh, one last bit of good news is that Darkfish (on IC.net) seems to be making the plug-and-play FAS module again, so hopefully that will be in my short-term future.