Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Saying hello, will eventually seek help with MPGuino

nordic · 11-14-2016, 09:43 PM

Hello. I have a 1988 Honda Prelude. I just recently attempted installing an MPGuino. I don't have much experience with electrical work so this is a fun project.

I connected the 12v to the fuse box on the drivers side, the ground to some steel, the inj to the brown wire #1 in Connector A, and the vss wire to the yellow/blue wire #10 in Connector B.

I am getting an inj signal but not a vss signal. Could anyone give me a tip or two here before I move on to a more specific subforum?

11-14-2016, 09:43 PM	#1 (permalink)
nordic EcoModding Lurker Join Date: Nov 2016 Location: Pacific Northwest Posts: 8 Yellow - '88 Honda Prelude Thanks: 0 Thanked 0 Times in 0 Posts	Saying hello, will eventually seek help with MPGuino Hello. I have a 1988 Honda Prelude. I just recently attempted installing an MPGuino. I don't have much experience with electrical work so this is a fun project. I connected the 12v to the fuse box on the drivers side, the ground to some steel, the inj to the brown wire #1 in Connector A, and the vss wire to the yellow/blue wire #10 in Connector B. I am getting an inj signal but not a vss signal. Could anyone give me a tip or two here before I move on to a more specific subforum? Last edited by nordic; 11-14-2016 at 09:52 PM..