Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - P&S open source AC controller and hughes Motor, (us electricar)

CoopL · 01-03-2017, 10:33 PM

Thanks for the response, I really appreciate it!
The motor is a 15 Kw AC motor, 50 kw peak oil cooled. Max voltage is approximately 190v.

I am looking to get 40-60 best case but 20 miles would be fine for my range. I would like to be able to reach highway speeds (60-70 Mph) I do not need it to go crazy fast or anything like that. I plan on using the transmission and clutch that was in the car.

I have been participating in the EV Challenge EV CHALLENGE at NCCAR. I think based on the cars I have seen there that the high schoolers have done this should be doable.
Currently I do not have the information from the name plate whoever I will be able to get it off of the motor very soon.

01-03-2017, 10:33 PM	#4 (permalink)
CoopL EcoModding Lurker Join Date: Nov 2016 Location: Hillsborough Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post	Thanks for the response, I really appreciate it! The motor is a 15 Kw AC motor, 50 kw peak oil cooled. Max voltage is approximately 190v. I am looking to get 40-60 best case but 20 miles would be fine for my range. I would like to be able to reach highway speeds (60-70 Mph) I do not need it to go crazy fast or anything like that. I plan on using the transmission and clutch that was in the car. I have been participating in the EV Challenge EV CHALLENGE at NCCAR. I think based on the cars I have seen there that the high schoolers have done this should be doable. Currently I do not have the information from the name plate whoever I will be able to get it off of the motor very soon.