Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

motorulf · 01-04-2017, 04:33 PM

I tested all sensors with a AC load, as i do not have a working DC load with more than 1 amp.
All of the sensors measured the same.
My vacuum cleaner did not consume more than 8 amps, but still i got a value out of the sensors. They show 0.016V in AC, 2.5V in DC, all of them...
I am guessing they are either all broken or all still working.

I think they are working.
Any other suggestions?

01-04-2017, 04:33 PM	#2953 (permalink)
motorulf EcoModding Lurker Join Date: Dec 2016 Location: northern sweden Posts: 33 Thanks: 17 Thanked 20 Times in 17 Posts	I tested all sensors with a AC load, as i do not have a working DC load with more than 1 amp. All of the sensors measured the same. My vacuum cleaner did not consume more than 8 amps, but still i got a value out of the sensors. They show 0.016V in AC, 2.5V in DC, all of them... I am guessing they are either all broken or all still working. I think they are working. Any other suggestions?