I was looking at this material for potential wheel covers the other day...!
But maybe not:
https://en.wikipedia.org/wiki/Closed-cell_PVC_foamboard
Quote:
|
One drawback to PVC materials is that hot working them produces noxious fumes containing hydrochloric acid and potentially even dioxins. These are a respiratory hazard in a workshop, and the acid fumes are so serious that they may damage equipment. Some heat-based processes, notably laser cutting, are generally considered impossible, owing to the equipment risk. Where PVC materials are cut by laser, this is a highly specialized process requiring adapted machines and acid-specific fume extraction and filtering.
|
If it rubs or burns in any way it can get quite nasty.
Be safe.
__________________
2011 Honda Insight + HID, LEDs, tiny PV panel, extra brake pad return springs, neutral wheel alignment, 44/42 PSI (air), PHEV light (inop), tightened wheel nut.
  lifetime FE over 0.2 Gigameter or 0.13 Megamile.
For confirmation go to people just like you.
For education go to people unlike yourself.
|