Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Aero Design Senior Project Community Ideas

Aeroguy · 02-01-2017, 02:36 PM

I am currently working on a senior project that revolves around designing, 3D printing and scale model wind tunnel testing various wings, spoilers and other rear attachments (not diffusers at least not yet anyway). Each wing/spoiler is attached to the trunk. I am reaching out to the community for designs for wings/spoilers. I have a few (~14) but I would like more. In addition, if there is anything you would like me to test for you, please let me know. The car is a 1/24th scale EM1 Civic Coupe. The wings will be tested for drag and downforce/lift. I may or may not be able to translate these into real world values but at the very least they can be compared to one another (and stock).

Thanks for taking to the time to read this.

02-01-2017, 02:36 PM	#1 (permalink)
Aeroguy EcoModding Lurker Join Date: Feb 2017 Location: Seattle Posts: 16 Thanks: 2 Thanked 8 Times in 5 Posts	Aero Design Senior Project Community Ideas I am currently working on a senior project that revolves around designing, 3D printing and scale model wind tunnel testing various wings, spoilers and other rear attachments (not diffusers at least not yet anyway). Each wing/spoiler is attached to the trunk. I am reaching out to the community for designs for wings/spoilers. I have a few (~14) but I would like more. In addition, if there is anything you would like me to test for you, please let me know. The car is a 1/24th scale EM1 Civic Coupe. The wings will be tested for drag and downforce/lift. I may or may not be able to translate these into real world values but at the very least they can be compared to one another (and stock). Thanks for taking to the time to read this.