This discussion came up circa 2009-10. I walked an apartment complex parking lot in Texas with a steel tape -- no lack of pickups -- and found that regardless of brand the standard front air dam clearance was 10".
In looking at reports by those who've gone to great effort with pickup underbody enclosures, I decided that for my diesel one ton that a more pronounced airdam and side skirts from conveyor belting would suffice for my needs. See threads/posts by Big Dave and skyking in this.
Rear exit has been addressed somewhat (aerohead), but I don't remember thread topic or title. Probably on one of BamZipPow's threads.
Partial bed tonneau (plywood would suffice) extending from tailgate to barely past the midway point to cab is a cheap upgrade. Again, aerohead.
If you're a genuinely good guy, contact ChazInMT for how to take a profile photograph of that pickemup, and get him to draw the curve superimposed. Use it or not, but you'll better understand aero lid covers.
Aerohead has also talked about tapering the body exterior inwards from cab to tailgate. Doesn't look like you're afraid of much.
Take in the full array of what can work for aero. Subtle changes might work wonders.
And, Polymetal. (With Da Beard Free we're gonna find a way to make that Miracle Metal a holy sacrament for initiates. The old Hip Eye picked up on the vibrations of that stuff and damned if the waveform didn't finally hit Tejas).
.
Last edited by slowmover; 04-03-2017 at 09:05 PM..
|