Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - TexasElectric

TexasElectric · 06-28-2017, 02:03 PM

Grant-53

That is pretty neat! Looks like you moved the shifters and brakes. Got to be careful of sharp corners/edges. With a setup like that i'd think it'd be easier to install some sort of wind shield in front of the aero bars (if you wanted to).

6/28 update

I finished soldering the remaining 8 BMS wires. I triple checked the voltage on each of the BMS leads. Everything looks good.

Thats all for today. More to come tomorrow!

06-28-2017, 02:03 PM	#93 (permalink)
TexasElectric EcoModding Lurker Join Date: Feb 2017 Location: Texas Posts: 48 Thanks: 1 Thanked 27 Times in 15 Posts	Grant-53 That is pretty neat! Looks like you moved the shifters and brakes. Got to be careful of sharp corners/edges. With a setup like that i'd think it'd be easier to install some sort of wind shield in front of the aero bars (if you wanted to). 6/28 update I finished soldering the remaining 8 BMS wires. I triple checked the voltage on each of the BMS leads. Everything looks good. Thats all for today. More to come tomorrow!