Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Controller mods or build for E-assist altermotor

HaroldinCR · 10-25-2017, 08:22 PM

I have the other parts here, also. Will get a couple of photos tomorrow and post them up.

My build will be a 3 wheel leaning tadpole, constructed from a 150cc Frame and extended swing arm to mount the motor as near the swivel as possible. I already have the 30S Volt pack mounted inside the frame.

I'm also building a 2 speed dog clutch tranny. I need some hill climbing along with 55 MPH. This will be enclosed with really light aero fairings with storage space for groceries, etc.

I believe e-vector stated around 50Hp with a 30S battery.

Might just throw a partly converted photo up, also. I really do hope you can get this to work, so I can follow along. I really need this thing for town trips of 25 miles in hilly terrain.

PM sent, Chaz

10-25-2017, 08:22 PM	#99 (permalink)
HaroldinCR EcoModding Apprentice Join Date: Mar 2009 Location: Costa Rica Posts: 138 Thanks: 24 Thanked 47 Times in 39 Posts	I have the other parts here, also. Will get a couple of photos tomorrow and post them up. My build will be a 3 wheel leaning tadpole, constructed from a 150cc Frame and extended swing arm to mount the motor as near the swivel as possible. I already have the 30S Volt pack mounted inside the frame. I'm also building a 2 speed dog clutch tranny. I need some hill climbing along with 55 MPH. This will be enclosed with really light aero fairings with storage space for groceries, etc. I believe e-vector stated around 50Hp with a 30S battery. Might just throw a partly converted photo up, also. I really do hope you can get this to work, so I can follow along. I really need this thing for town trips of 25 miles in hilly terrain. PM sent, Chaz Last edited by HaroldinCR; 10-25-2017 at 08:31 PM..