Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

racprops · 03-15-2018, 11:42 PM

And I know of Rhoads lifters and A) they do not work very well and B) are nosy...

And I drive a 2000 Mercury and it has a wide oil pressure range as low as 10PSI and as high as 80PSI it would be hard to set up Rhoards Lifters in such an engine.

Until they make heads for Ford & Chevy engines with then new camless electric hydraulic valves, this was the best I can get of either my Ford and Chevy Van.

Rich

03-15-2018, 11:42 PM	#6 (permalink)
racprops Master EcoModder Join Date: Oct 2009 Location: Phoenix AZ Posts: 799 Thanks: 4 Thanked 66 Times in 58 Posts	And I know of Rhoads lifters and A) they do not work very well and B) are nosy... And I drive a 2000 Mercury and it has a wide oil pressure range as low as 10PSI and as high as 80PSI it would be hard to set up Rhoards Lifters in such an engine. Until they make heads for Ford & Chevy engines with then new camless electric hydraulic valves, this was the best I can get of either my Ford and Chevy Van. Rich Last edited by racprops; 03-15-2018 at 11:52 PM..