Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

larrybuck · 04-19-2018, 03:20 PM

Hi folks I picked up a 70 Barracuda as a project car there's no key the nice aluminum area where you would put the key in is gone just just a slotted hole in the middle of the inner part and I just need to be able to push the car and in the position in a shop can I just take a big chisel and smash it in do I drill it out I plan on getting a nice tilt column later on but I have another car project in front of this I just want to be able to move it around in the shop steer it like a human being your thoughts please

04-19-2018, 03:20 PM	#1 (permalink)
larrybuck Master EcoModder Join Date: Apr 2011 Location: sw Washington (state), a little north of Vancouver Posts: 1,156 Thanks: 298 Thanked 122 Times in 88 Posts	Steering locked Hi folks I picked up a 70 Barracuda as a project car there's no key the nice aluminum area where you would put the key in is gone just just a slotted hole in the middle of the inner part and I just need to be able to push the car and in the position in a shop can I just take a big chisel and smash it in do I drill it out I plan on getting a nice tilt column later on but I have another car project in front of this I just want to be able to move it around in the shop steer it like a human being your thoughts please __________________ 06 Chev MonteC JG#24tribute car 30mpg 00 Honda Insight 63MPG 98 Buick Park Ave3.8 33MPG 89 Toyota Corolla wag 60MPG so far 07 Honda ST1300 55MPG 83 Honda 650 GL 64MPG 19 Suzuki dr200 88MPG23 HondaGrom?+Tow K10D Sub 26mpg NEVER,NEVER GIVE UP! PUMP THOSE TIRES UP! DRIVE IN YOUR SOCKS FOR SENSITIVITY!!!!!!!!!!!!!!! SLOW DOWN AND SMOOTH UP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!