Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

Don Gannon · 05-13-2018, 07:35 PM

Hi Paul,

I have been following this thread for several months now. Just registered to toss in a request for the new DC control board. Will the old one that is listed on your site work with the board? The 3 IGBT one? Will need a BOM for it. I have the schematic thingstodo provided, and can work with that.

Should be no problems with assembly, as I have been doing electronics for several years. Have most of the tools, or access to them. A good buddy manages a state of the art machine shop, and I spent a few years as a machinist in the Navy.

05-13-2018, 07:35 PM	#7263 (permalink)
Don Gannon EcoModding Lurker Join Date: May 2018 Location: Cocoa, Florida Posts: 12 Thanks: 6 Thanked 5 Times in 5 Posts	I want one! Hi Paul, I have been following this thread for several months now. Just registered to toss in a request for the new DC control board. Will the old one that is listed on your site work with the board? The 3 IGBT one? Will need a BOM for it. I have the schematic thingstodo provided, and can work with that. Should be no problems with assembly, as I have been doing electronics for several years. Have most of the tools, or access to them. A good buddy manages a state of the art machine shop, and I spent a few years as a machinist in the Navy.