|
I decided to go full V-nose (and remove my toolbox).
Reasoning for overall shape is dictated by aluminum pieces:
1. The 48" x 96" diamondplate will be the hinged lid access to the nose.
2. The 60"tall x 144"long x .050"thick will be the maximum wall height.
Guestimating that the interface between the vinyl-covered bed, and the beginning of the trailer is about the only factor I can "adjust". That is the part I am trying to maximize effort. Cannot reduce/taper/round/Kammback any of the rest of the trailer, due to constraints of cargo, and/or welding the aluminum structure complexity.
Here is my cargo:
|