Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

Daox · 11-18-2019, 10:35 AM

I didn't know how well a large bottom and top plate would actually fit up against the cells, so I printed out a small section. I wanted to see how stiff the plate would be and how well the cells would fit in the recesses as well. Here is what we have.

The cells fit very nicely into the bottom plate. The top plate (which is the same as the bottom plate) was a bit more difficult to get the cells to drop into place. I think I will make some tweaks and make another test with a 3x3 cell holder.

11-18-2019, 10:35 AM	#51 (permalink)
Daox Administrator Join Date: Dec 2007 Location: Germantown, WI Posts: 11,203 CM400E - '81 Honda CM400E 90 day: 51.49 mpg (US) Daox's Grey Prius - '04 Toyota Prius Team Toyota 90 day: 49.53 mpg (US) Daox's Insight - '00 Honda Insight 90 day: 64.33 mpg (US) Swarthy - '14 Mitsubishi Mirage DE Mitsubishi 90 day: 56.69 mpg (US) Daox's Volt - '13 Chevrolet Volt Thanks: 2,501 Thanked 2,587 Times in 1,554 Posts	I didn't know how well a large bottom and top plate would actually fit up against the cells, so I printed out a small section. I wanted to see how stiff the plate would be and how well the cells would fit in the recesses as well. Here is what we have. The cells fit very nicely into the bottom plate. The top plate (which is the same as the bottom plate) was a bit more difficult to get the cells to drop into place. I think I will make some tweaks and make another test with a 3x3 cell holder. Attached Thumbnails __________________ Current project: A better alternator delete