Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

racprops · 01-24-2020, 11:05 PM

After searching for years I found out that Salt Flat Racers are the ones with Tall Rear End Gears sets.

There are a couple of face book pages that cater to these racers etc. But it is a bit hard to get on there and they may want to keep them for fellow racers…so I am putting this on all the car sites I belong to.

I am looking for tall gear sets for my 8.8 Ford in a 03 Crown Vic and for my 10 Bolt 5 lug G20 93 Chevy Custom Van.

For the Ford I found that they made these gears sets: 2.26, 2.47, and I think something around 2.56.

And I am looking for the closes to those numbers for the Chevy.

I am hoping someone here can help me.

Rich

WHY?? I plan on running 6R80 in the Crown Vic and a 8L90E in the van and with the super low lower gears will have the same power at take off as the stock transmission and rear end.

01-24-2020, 11:05 PM	#1 (permalink)
racprops Master EcoModder Join Date: Oct 2009 Location: Phoenix AZ Posts: 799 Thanks: 4 Thanked 66 Times in 58 Posts	Tall Rear End Gears After searching for years I found out that Salt Flat Racers are the ones with Tall Rear End Gears sets. There are a couple of face book pages that cater to these racers etc. But it is a bit hard to get on there and they may want to keep them for fellow racers…so I am putting this on all the car sites I belong to. I am looking for tall gear sets for my 8.8 Ford in a 03 Crown Vic and for my 10 Bolt 5 lug G20 93 Chevy Custom Van. For the Ford I found that they made these gears sets: 2.26, 2.47, and I think something around 2.56. And I am looking for the closes to those numbers for the Chevy. I am hoping someone here can help me. Rich WHY?? I plan on running 6R80 in the Crown Vic and a 8L90E in the van and with the super low lower gears will have the same power at take off as the stock transmission and rear end.