Quote:
Originally Posted by Yippeekyaa
Several issues i see with this. The material those are made from is too flimsy to hold up at highway speeds and 3m tape wont hold on them long at highway speeds. Also those would cost you over 100$ for a set of 4. For less money you can install the dust brake shields that go on the inside of the wheels.
https://www.speedwaymotors.com/shop/...35-3-495-30448 |
I don't know. Those 3M tapes hold body parts pretty solid at highway speeds not to mention race speeds. Also those aren't 17"
Quote:
Originally Posted by kach22i
And also it's not flat at all.
However, there is hope that something better is still out there.
|
I see it's not flat AT ALL too xD I was just thinking (hoping) it will be better to have a not flat wall than having 10 thin spokes with wide open wheel face. I'm still looking tho.