[M_a_t_t]

I also remade the modified GIF. Much easier to look at.



Now for my armchair analysis, let me know how agreeable it is. It appears to be working, atleast better than the stock version. The part on the bumper is angled too sharply and/or because of the spinning wheel and is getting early separation as a result. The lower half shows this because it is flat against the body at the top. The upper half by the tail light seems to be working the best, but possible interference from the rounded trunk edge and wing. Tufts 2 and 3 (from the top) are what I should try to get all the tufts to do.