|
mines not working! when i plug in usb the red light comes on and the yellow one flashes on/off. i installed the aduino software but when i try and paste the code and try to upload to I/O board it just says code is too big?
---
i bought the iduino and parts separatly not the cool new all-in-one kit. i tested the test wiki and resistances were all infinate.
any sugestions?
__________________
Nissan Leaf 24kwh. Average FE = 300mpg 3.6miles/kwh (@plug)
Last edited by modmonster; 10-04-2008 at 09:01 AM..
Reason: ---
|