Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Cd 0.21 Ford Fusion 999 hydrogen LSR spoiler

aerohead · 12-06-2021, 01:38 PM

You can just make out a line of rivets in the green of the capping plate. I'm not sure about up above.
There's a photograph taken from above the car and it appears that the extension drops a bit as it progresses rearwards, as an extension of the trunklid ( boot ).
I printed an 11" X 17" color copy for the light table and drafting instruments.
Real people will scan it into their software package.
HOT ROD Magazine's Project Red Hat, LSR Camaro, Cd 0.20, showed a perfect template match off the backlight onto the spoiler top.

12-06-2021, 01:38 PM	#3 (permalink)
aerohead Master EcoModder Join Date: Jan 2008 Location: Sanger,Texas,U.S.A. Posts: 15,908 Thanks: 23,993 Thanked 7,227 Times in 4,654 Posts	plane of the shelf extension You can just make out a line of rivets in the green of the capping plate. I'm not sure about up above. There's a photograph taken from above the car and it appears that the extension drops a bit as it progresses rearwards, as an extension of the trunklid ( boot ). I printed an 11" X 17" color copy for the light table and drafting instruments. Real people will scan it into their software package. HOT ROD Magazine's Project Red Hat, LSR Camaro, Cd 0.20, showed a perfect template match off the backlight onto the spoiler top. __________________ Photobucket album: http://s1271.photobucket.com/albums/jj622/aerohead2/