Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Prius 75-91mpg

Nathan jones · 06-21-2022, 03:26 PM

While I was bored waiting for coolant I wondered why one fan has different blades and well so one is for the Aircon which I don't have anymore. It was roughly 2kg too, I will do a weigh up after. I might not need a fan at all. I'm doing tests...

Although I may have to go to work for a few days without it anyway, the fan switch sensor terminals were corroded and snapped so no point just yet. I'm sure my dash will tell me if the inverter gets too hot..

The steel brackets were 106g and these are 10, although the originals do hold the Aircon condenser too in a regular car

06-21-2022, 03:26 PM	#275 (permalink)
Nathan jones Ecomodding Apprentice Join Date: Dec 2018 Location: england Posts: 308 Thanks: 43 Thanked 130 Times in 111 Posts	While I was bored waiting for coolant I wondered why one fan has different blades and well so one is for the Aircon which I don't have anymore. It was roughly 2kg too, I will do a weigh up after. I might not need a fan at all. I'm doing tests... Although I may have to go to work for a few days without it anyway, the fan switch sensor terminals were corroded and snapped so no point just yet. I'm sure my dash will tell me if the inverter gets too hot.. The steel brackets were 106g and these are 10, although the originals do hold the Aircon condenser too in a regular car Attached Thumbnails Last edited by Nathan jones; 06-21-2022 at 03:55 PM..