Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Where to get water temp signal for grill blocking

Dust · 10-14-2008, 10:36 PM

Ya, it:s a long story.

The temp sensor is a m14 P1.5, which I can only find at summitracing.com offered by autometer. The part is $14, and shipping would be an extra $10. Plus $10 for the T-fitting and the 1/8 NPT to m14 adapter. So, to make both the 1/8 NPT from the gauge, and the m14 from the stock sensor work, it would be about $35, or about $10 for the inline adapter and and $14 for a new hose when I take it out. But I guess if the GF is gonna pay for it, then it doesn:t really matter does it?

10-14-2008, 10:36 PM	#4 (permalink)
Dust EcoModding Apprentice Join Date: May 2008 Location: Mito, Japan Posts: 106 The Move - '99 Daihatsu Move Aero Down Custom XX 90 day: 29.89 mpg (US) Thanks: 0 Thanked 1 Time in 1 Post	Ya, it:s a long story. The temp sensor is a m14 P1.5, which I can only find at summitracing.com offered by autometer. The part is $14, and shipping would be an extra $10. Plus $10 for the T-fitting and the 1/8 NPT to m14 adapter. So, to make both the 1/8 NPT from the gauge, and the m14 from the stock sensor work, it would be about $35, or about $10 for the inline adapter and and $14 for a new hose when I take it out. But I guess if the GF is gonna pay for it, then it doesn:t really matter does it? Last edited by Dust; 10-14-2008 at 10:42 PM..