View Single Post
Old 10-05-2022, 05:50 AM   #21 (permalink)
Logic
EcoModding Apprentice
 
Join Date: Aug 2022
Location: South Africa
Posts: 133
Thanks: 56
Thanked 52 Times in 46 Posts
Quote:
Originally Posted by freebeard View Post
This approaches the Tesla one-way valve. I was [conceptually] trying to get there with a ring of holes.
I would say that a bunch of small PWTBs, with half torus front ends and sharpened from the outside in 'pipes' and at slight angles to each other is the closest to a 3D Tesla Valve one could get Freebeard.

A difficult shape/s to fabricate, but one cant help wondering what effect such would have on exhaust flow and economy at low rpms.

The stock Tesla Valve for others reading this and wondering whatTH we're on about:
NB the acceleration of flow rate in the fast direction and ...er back-bounce from the open end.

  Reply With Quote