View Single Post
Old 11-05-2008, 02:33 AM   #1 (permalink)
Master EcoModder
Join Date: Jul 2008
Location: Private
Posts: 282
Thanks: 2
Thanked 73 Times in 47 Posts
Help - Spiffie MPGuino Problem


I installed my MPGuino tonight and all was well until I went for a drive. When stopped, the GH showed .31 at idle, about right. No speed indication. When driving, and the VSS started to send a signal, the guino would reset, work for a while, speed would read high, reset, finally locked up. Had to remove power to reset. It is connected to the vss+ at the ecu, vss counts set to 8000 for now. Where to go from here?

  Reply With Quote