Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

trebuchet03 · 11-15-2008, 01:25 AM

Thanks Metro - I'll work on that shortly...

I've been going back and forth between the cut plots (what I've been posting) and working on the 3D model... The 3Dmodel is HUGE, and really bogs down my machine... Saving is a 5 minute operation, and I've already crashed once

I've got maybe 100 or so features to repair - even then, I don't know if it will work

Boundary layer pictures

Those points (some highlighted) indicate where the boundary layer WAS in my last boundary layer post - this shows improvement

Angle, according to SW, is 18.18 degrees... As before, red=55mph or more, blue=0mph or less

Here's the wave plot, just to keep things organized

Metro, where are you measuring the 9 degree angle? I'm getting ~15 degrees

When I measure from tip of spoiler to very top, I get something ~9 degrees....

11-15-2008, 01:25 AM	#35 (permalink)
trebuchet03 MechE Join Date: Dec 2007 Location: Bay Area Posts: 1,151 The Miata - '01 Mazda MX-5 Miata Thanks: 0 Thanked 22 Times in 18 Posts	Thanks Metro - I'll work on that shortly... I've been going back and forth between the cut plots (what I've been posting) and working on the 3D model... The 3Dmodel is HUGE, and really bogs down my machine... Saving is a 5 minute operation, and I've already crashed once I've got maybe 100 or so features to repair - even then, I don't know if it will work Boundary layer pictures Those points (some highlighted) indicate where the boundary layer WAS in my last boundary layer post - this shows improvement Angle, according to SW, is 18.18 degrees... As before, red=55mph or more, blue=0mph or less Here's the wave plot, just to keep things organized Metro, where are you measuring the 9 degree angle? I'm getting ~15 degrees When I measure from tip of spoiler to very top, I get something ~9 degrees.... Attached Thumbnails __________________ Cars have not created a new problem. They merely made more urgent the necessity to solve existing ones. Last edited by trebuchet03; 11-15-2008 at 01:35 AM..