Quote:
Originally Posted by orange4boy
Remember, this is an open source diy kit so you have to be prepared for some issues. MPGuino is still tons cheaper and more customizable than scanguage.
To relaod the code you have to download and run the arduino 011 program, cut and paste the code from the google code page into a new sketch, plug in your Guino with a usb and click on upload to I/O board. try that to see if it works. If you get a sketch too big message (i did on a mac) I could post my reduced sketch for you.
Good luck
|
Orange4boy:
I got the sketch too big message as well using arduino 0011 on Ubuntu. I would appreciate a pointer to your reduced sketch.
Thanks
Brownell