Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

MPaulHolmes · 01-30-2009, 01:04 AM

The Brass bolts came today! They are normally about $1.65 each, but I got them for like $0.20 each on ebay. There was only one person selling them, too (on all of Ebay)! I have enough for about 10 controllers.

The shiny ones in my hand are a small sample of the ones that I soaked in lemon juice for a while, and then wiped down. The ugly ones in the box are some of the ones that I haven't soaked yet. They will be used to conduct the current from the capacitors to the other side of the power board.

01-30-2009, 01:04 AM	#328 (permalink)
MPaulHolmes PaulH Join Date: Feb 2008 Location: Maricopa, AZ (sort of. Actually outside of town) Posts: 3,832 Michael's Electric Beetle - '71 Volkswagen Superbeetle 500000 Thanks: 1,362 Thanked 1,202 Times in 765 Posts	Brass Bolts came today! The Brass bolts came today! They are normally about $1.65 each, but I got them for like $0.20 each on ebay. There was only one person selling them, too (on all of Ebay)! I have enough for about 10 controllers. The shiny ones in my hand are a small sample of the ones that I soaked in lemon juice for a while, and then wiped down. The ugly ones in the box are some of the ones that I haven't soaked yet. They will be used to conduct the current from the capacitors to the other side of the power board. Attached Thumbnails __________________ kits and boards Last edited by MPaulHolmes; 01-31-2009 at 12:50 PM..