Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

Bendr · 02-10-2009, 01:19 AM

Hi folks,

I'm getting ready to put together and install the mpguino spiffie kit in my '95 4 door 4 cylinder geo metro.

In my research I've run into a few posts mentioning some sort of issue with hooking up the fuel injector at the end with the ECU on a metro, I couldn't find any detail about this in my searching, so now I'm asking before I start tearing it apart.

My question is this, Is there an issue? do I have to take wiring through the firewall and tap the injector, or can I get away with making it much simpler, and bring all the wiring to the ECU?

Thanks,
Ben

02-10-2009, 01:19 AM	#1 (permalink)
Bendr EcoModding Lurker Join Date: May 2008 Location: California Posts: 5 GEOrge - The Thoroughbred of Righteousness - '95 Geo Metro 90 day: 34.13 mpg (US) Thanks: 0 Thanked 0 Times in 0 Posts	Installing in metro, injector issue? Hi folks, I'm getting ready to put together and install the mpguino spiffie kit in my '95 4 door 4 cylinder geo metro. In my research I've run into a few posts mentioning some sort of issue with hooking up the fuel injector at the end with the ECU on a metro, I couldn't find any detail about this in my searching, so now I'm asking before I start tearing it apart. My question is this, Is there an issue? do I have to take wiring through the firewall and tap the injector, or can I get away with making it much simpler, and bring all the wiring to the ECU? Thanks, Ben