Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

MPaulHolmes · 02-26-2009, 09:32 AM

Excellent point Matt! I secretly attached them to the heat spreader, soldered them in place, and removed the heat spreader again. Each one was perfectly flush against it when being soldered in place. ya! I'm so sneaky sometimes.

Another nice thing is, they won't be bolted to the heat spreader, only clamped against it, so it allows them up/down/left/right freedom when reattaching them.

02-26-2009, 09:32 AM	#454 (permalink)
MPaulHolmes PaulH Join Date: Feb 2008 Location: Maricopa, AZ (sort of. Actually outside of town) Posts: 3,832 Michael's Electric Beetle - '71 Volkswagen Superbeetle 500000 Thanks: 1,362 Thanked 1,202 Times in 765 Posts	Excellent point Matt! I secretly attached them to the heat spreader, soldered them in place, and removed the heat spreader again. Each one was perfectly flush against it when being soldered in place. ya! I'm so sneaky sometimes. Another nice thing is, they won't be bolted to the heat spreader, only clamped against it, so it allows them up/down/left/right freedom when reattaching them. __________________ kits and boards Last edited by MPaulHolmes; 02-26-2009 at 09:39 AM..