I have had an idea for a bed cover for a while, but now that I know how to use Google SketchUp well enough to make poor drawings, I don't feel as bad posting my ideas.
Basicly a typical truck looks like this.
Most of the bed covers that people look into making look like this, or aren't even tapered at the end.
What I am thinking looks more like this. With the tail gate down there would be a lot less trailing edge.
Or with the "fins" tapered down. Obviously the fin tapers would have to be clear for the tail lights.
Is there a reason for not doing this? The reasons I can think of are:
- The amount of volume is reduced.
- There may be additional turbulence created by the "fins".
- The angle may be too steep depending on truck
Are there others that I'm just not thinking of? I know Phil Knox didn't do this, so I figure there must be a reason. I don't have a truck to do this on, but I suggested it to my dad and he said it would be too much hassle to get in and out, so he wanted nothing to do with it... but I thought maybe someone else would.