Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

eco86 · 03-09-2009, 11:29 PM

You may want to try using a heat gun from a hobby or craft store. If I remember correctly, they are fairly cheap, and can produce temperatures near 400 degrees F, which is more than enough to shape acrylic in a vacuum former.

03-09-2009, 11:29 PM	#6 (permalink)
eco86 Almost fuel free! Join Date: Nov 2008 Location: Georgia Posts: 24 Thanks: 0 Thanked 2 Times in 2 Posts	You may want to try using a heat gun from a hobby or craft store. If I remember correctly, they are fairly cheap, and can produce temperatures near 400 degrees F, which is more than enough to shape acrylic in a vacuum former.