[wildfire8]

Sorry been busy.
I just did a tape mock up of a block on my bumper and grill. I had left an opening in front on the bumper. It was not that big.

I am now making a bumper block out of plexie glass. I got from lows from there scrap pile they where going to throw out. They happen to be the perfect size just needed to shape the edges for my bumper. And cut a hole for the fog light.
I am still working on it.

1st picture is of the stock car.
2nd picture is of the taped version of the block. I never took a picture so I just made a mock up drawing of what I had. The red is where the tape was. The part not taped on the right of the bumper is where my ram air tube is for my Intake. The other side was was covered all the way.
3rd picture everything that is in red on the 2nd is going to be be block with plexie glass but the hole is going to be bigger the red box is going to be the size of the hole.

I am going to just try it out with just the bumper for the first little bit. Then work on the grill.