![]() |
Need clear pictures of your car's underside?
10 Attachment(s)
Are you thinking about making an undertray for your car but need that extra encouragement? Tell me what car to look for, and i'll snap a few pictures for you.
I finally got a car related job, and my workplace has lifts, so I get to see the undersides of lots of cars. If you want good pictures of the underside of your car/specific areas, just ask here. Thanks to work, my cars driven list is getting a lot bigger. And i had a few firsts as far as engine configurations as well: First inline 6, first v10, first boxer, and first diesel all thanks to work. Here are some interesting undertrays I found: 2005 Honda Odyssey front tire spat: Attachment 20155 NACA ducts on a new Jeep (compass I think) Attachment 20156 Attachment 20157 My car! :D Attachment 20158 Attachment 20159 Attachment 20160 Rear diffuser on a 2011 Lexus LS 460 Attachment 20161 Rear diffuser on a 2004-2008 Acura TL Attachment 20162 Undertray and NACA duct on a 2005 Porsche Cayenne. This car dumped oil all over my face. Attachment 20163 Attachment 20164 I also doing my part to reduce the fuel consumption of others by making sure their tires are aired up (shop policy is 35 PSI, unless door says higher) and zip-tying up loose undertray panels. |
Thank you. Most interesting.
|
How about a 2000± Honda Accord V6 by the rear bumper? Would a belly pan help? Sorry to ask this, but I'm handicapped and can't get down to look.
|
Quote:
|
3 Attachment(s)
Quote:
The major difference between the rear of my v6 and your v6 is that the Y pipe where it splits to the dual exhausts points out/down in your car. I believe the 6th gen V6 accord like yours sticks down even more than this TL does. Attachment 20445 Attachment 20444 Attachment 20443 |
1998 Honda Civic DX coupe underside photos
5 Attachment(s)
Good thread idea. Here are mine, taken while muffler was be welded/replaced (so muffler missing).
Suspension hangs really low in the back: http://ecomodder.com/forum/attachmen...1&d=1472238031 Parachute rear bumper cover (with great angle and mounting points, however: http://ecomodder.com/forum/attachmen...1&d=1472237789 I was surprised how well aligned the middle panels were, but for the muffler trench: http://ecomodder.com/forum/attachmen...1&d=1472238050 AND for comparison: 2012 Civic Hybrid (closer to my car than I expected): http://ecomodder.com/forum/attachmen...1&d=1472238293 2016 Mercedes CLA 250 (VERY thorogh!): http://ecomodder.com/forum/attachmen...1&d=1472238293 |
All times are GMT -4. The time now is 03:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com