Dynamic fairing for wheel well enclosure

[Jim Bullis]

I see here many attempts at wheel skirts, including front wheel skirts. However, only an integrated skirt and bottom panel can accomplish the needed improvemt for the front wheel well problem.

A concept is available for a dynamic fairing that combines wheel skirts and bottom pan in a way that eliminates the wheel well effect.

This is well known as a major hindrance to efficient cars.

This is available as to individuals on a single license basis for a nominal fee. It is not an engineering drawing at this point, but the project can be understood from Fig 23 and associated text in the Published Patent on Miastrada Motors (See Patents page.)

This is offered only as a concept for those capable of all the appropriate engineering design and safety analysis.

Miastrada will cooperate with interested parties as much as possible in bringing this concept to the product stage and ultimate licensing to manufacturers. Those who take an active part in this development will be included in financial gain if such comes about.

It is strongly emphasized that product engineering responsibility must be assumed by anyone who wishes to implement this concept and their associated ideas in connection with this development process.

Please use the contact form on the Miastrada site to discuss this, or comment here if so inclined.

Jim Bullis, President, Miastrada Company