VX factory dynograph, and calculation request
 

I was correcting some miss-information in a different Forum on the internet and thought I'd throw it out here as well for the furtherance of human knowledgement.

Information grabbed from The Honda Fact Book

The dyno graph from Honda on the VX:
http://www.thelic.org/users/tomo/CivicVXdyno.jpg
PS = Metric Horsepower (very close to international HP) = 92 HP (international)
Green Shading = kgm = Torque (kilogram meters); 13.9 (kg m) = 100.538893 ft. pounds
Blue Shading = g/PS-h = Fuel Consumption = grams of fuel consumed per hour per horsepower at a given engine speed. Weight of one US gallon of fuel ~6.5Lbs. = 2,948 grams.


Anyone care to make a little conversion to Gallons per hour from the information provided as a reference to future information seekers? I don't have the time to put into that right now and though it would be good to share.


Hope this info helps out for the archives. :thumbup:

Do you want me to translate for us?

No! We must stay in the perpetual darkness of not light 4ever. :p

So looks to me like all you VX'ers should be P&G'ing at about 3500 rpm for the Pulse section of the program. Is that about where the VTEC kicks in?

VTEC-E kicks in between 2500-3000RPM based on load, throttle position, coolant temp, and oil pressure.