Difference between revisions of "Radius front wheel arches"
(Created page with "Back to main mod page Image:SoftEdge.jpg '''Introduction'''<br> Radiusin...") |
(No difference)
|
Latest revision as of 15:08, 8 July 2018
Introduction
Radiusing the aft edge of wheel well arches allows air exiting the wheel well to more easily stay attached to/reattach to the side of the body.
While modifying the metalwork itself would be difficult, the mod could also be accomplished by adding & shaping material on the inside of the arch.
Examples of this design approach can be seen on the first generation Honda Insight, GM EV1 and Corvette, VW 1L concept, and Solectria Sunrise prototype EV (pictured).
Contents
Instructions for mod
Information required: How do people perform this modification, pictures, problems, what to look out for
Information required: A listing for different ways to do this if its different on different types of cars
User experiences
Please enter your user name and any relevant data in the table
| User Name | Car Make, Model, Year | Cost of Mod | Time to Perform Mod | MPG Before Mod | MPG After Mod | MPG improvement guess | Instruction Link |
|---|---|---|---|---|---|---|---|
| Example Data Saand | Example Data Mazda, 626, 1991 | Example Data $5 USD | Example Data 1 atlanta web design Hour | Example Data 27.2 | Example Data 29.8 | atlanta web design firms |
Problems / Consequences of mod
Information required: What are the consequences of the mod, Eg: drivability issue, stalling, engine wear,
