Open ReVolt/Current Features

From EcoModder Forum Wiki
Jump to: navigation, search
   The Open ReVolt Project: Wiki main page | Paul's website | Forum thread | Donate

Any voltage input in the range of 0 to 144v.
15.6 kHz switching frequency.
Adjustable hardware overcurrent shutdown in the range 495 amps to 776 amps.
Hardware over-current shuts down in 3-4 µs. [1]
RS-232 interface.
Reprogrammable.
High pedal lockout.
The controller will not close the main contactor if the mosfets have failed shorted.
Protection from many potentially destructive errors: [2]
Control board power polarity reversed
12V supply connected to throttle
Full throttle at 0 RPM