Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

ev59rag · 09-05-2009, 08:02 PM

I copied MPaulholmes idea. But instead of using steel, I used 1/2" inch thk aluminum bought from metal surplus store here in Kent,WA for 2 bucks per pound. Very light so I ended up paying like 30 bucks for 2 pcs of 12"x12" 1/2" aluminum plate. I chose aluminum too since it is easier to work with compared to steel.

For spacers, instead of Paul's aluminum tube. I used ordinary 1" steel pipe coupler used for plumbing. Its cheaper and less work. I dont have a drill press like Paul.

But, I cannot say that it will work... So far, 300 miles of use, no issues yet.

Cesar

09-05-2009, 08:02 PM	#46 (permalink)
ev59rag EcoModding Lurker Join Date: Mar 2009 Location: Seattle, WA Posts: 57 Thanks: 0 Thanked 2 Times in 2 Posts	I copied MPaulholmes idea. But instead of using steel, I used 1/2" inch thk aluminum bought from metal surplus store here in Kent,WA for 2 bucks per pound. Very light so I ended up paying like 30 bucks for 2 pcs of 12"x12" 1/2" aluminum plate. I chose aluminum too since it is easier to work with compared to steel. For spacers, instead of Paul's aluminum tube. I used ordinary 1" steel pipe coupler used for plumbing. Its cheaper and less work. I dont have a drill press like Paul. But, I cannot say that it will work... So far, 300 miles of use, no issues yet. Cesar __________________ EV59rag Parting out my EV. ES-31C D&D Motor Alltrax 7245 Controller Paul & Sabrina's Controller (never used)