Hi all,
first post here so take it with a large grain of salt but I've read this whole thread and there is no mention of how I mounted pizza pans on 15" stock steel rims. I need to note here that this will only work on some applications because my rims have a lip that accepts the pizza pans almost perfectly. (the pizza pans measure 16" straight across and the rim lip inside diameter is approx. 16 1/16") took some channel locks and squeezed the rolled up rim on the pizza pan so that it was forced out in 4 places. now the pans snap into place inside the rim lip like they were made for it. I haven't driven the vehicle at all with them like this as I did it last night. one other note with the balance weights that are on my rear tires i'm just going to cut a slot in the pizza pan and fold it inside so the weight of the cutout is still there just out of the way. I'll post some pics if anybody is interested and if I can figure out how to make them small enough
