View Single Post
Old 05-01-2010, 02:27 PM   #8 (permalink)
orange4boy
Master EcoModder
 
orange4boy's Avatar
 
Join Date: Aug 2008
Location: The Wet Coast, Kanuckistan.
Posts: 1,275

The Golden Egg - '93 Toyota Previa DX
90 day: 31.91 mpg (US)

Chewie - '03 Toyota Prius
90 day: 57 mpg (US)

The Spaceship - '00 Honda Insight
Thanks: 100
Thanked 306 Times in 178 Posts
Quote:
Nice execution. Have you done any tuft testing along the top?
Thanks. I'm much happier with how it looks now with the angled end bits.

First I tested just the top piece to get the main angle, but once I built the sides, I tuft tested the top and sides on the highway with a friend watching. No videos though. Tufts were stable and smooth with no vortex generation on the top corners but there was a but of fluttering on the bottom end of the sides so when I rebuilt it, I reduced the side angles a bit.

I'm probably getting some wicked vortex action at the bottom edge which will be dealt with when I make the bottom part.

The top is now around 11˚ and the sides are more like 15˚
__________________
Vortex generators are old tech. My new and improved vortex alternators are unstoppable.

"It’s easy to explain how rockets work but explaining the aerodynamics of a wing takes a rocket scientist.


  Reply With Quote