Quote:
|
From your pix it looks like your garnish does not have any blend radius between approach and tapers.
|
No, it doesn't have a lot of bend radius. I tried to radius it as much as I could, but I also had to make sure I still maintained some glue attachment surface for the side and top panels to the frame of the topper. That limited how much radius I could add. Besides, I don't think the garnishes in the report were attached with any significant radius.
Also, the opening is only about 39 inches wide. Not big enough for a full sheet of plywood, but big enough for most organs and all the amps and speaker cabinets I typically carry.