Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Belly pan how-to

Geo Metropolis · 02-08-2011, 02:55 AM

Not sure how to add this to the wiki but I did a thorough belly pan how-to on:
http://ecomodder.com/forum/showthrea...tml#post219175
for the Metro today. Cost about $7, took 3 hours. I used jack stands because I didn't have ramps but then was glad I did because it allowed me to lay the whole sheet of coreplast under the wheels for the initial shaping.
I did not have to build a frame and feel good about the not crazy amount of holes I had to drill.

02-08-2011, 02:55 AM	#32 (permalink)
Geo Metropolis Enthusiastic EcoModder Join Date: Dec 2010 Location: San Diego Posts: 90 Gnatmobile - '96 Geo Metro LSI 90 day: 44.68 mpg (US) theRAV - '01 Toyota RAV4 NV 90 day: 21.07 mpg (US) ACCELICA - '95 Toyota Celica GT Convertible Last 3: 23.46 mpg (US) The Van - '05 Chevrolet Uplander LS LWB 90 day: 21.04 mpg (US) Thanks: 4 Thanked 31 Times in 12 Posts	This may be of help - not sure how to add it to wiki Not sure how to add this to the wiki but I did a thorough belly pan how-to on: http://ecomodder.com/forum/showthrea...tml#post219175 for the Metro today. Cost about $7, took 3 hours. I used jack stands because I didn't have ramps but then was glad I did because it allowed me to lay the whole sheet of coreplast under the wheels for the initial shaping. I did not have to build a frame and feel good about the not crazy amount of holes I had to drill.